Tel: +86-512-5637 9347
Mobile: +86-139 1569 7401
Fax: +86-512-5637 9347
QQ:565573958
Characteristics
1. apply the double vertical pole and single horizontal beam to make enough rotation space, longer bottles, make the mold installation easy and simple.
2. the injection mould adopts the double assistant cylinder open-close mould; ensure the stable and quick moving. the clamping force is three points distribution. high-speed hydraulic-added valve can increase the clamping speed.
| Main parameters | UNIT | LW30 | LW45 | LW60 |
| Dia. Of screw | mm | 40 | 45 | 50 |
| Screw L/D | 20 | 22 | 22.5 | |
| Shot volume | cm3 | 200 | 325 | 430 |
| Injection weight | g | 142 | 250 | 310 |
| Injection pressure | Mpa | 175 | 167 | 161 |
| Max. Screw stroke | mm | 165 | 210 | 220 |
| Max. Screw speed | rpm | 10-225 | 10-235 | 10-235 |
| Heating capacity | Kw | 7.5 | 8.5 | 13 |
| No. Of heating zone | Qty | 3 | 3 | 3 |
| Clamping & blowing system | ||||
| Clamping force of injection | KN | 300 | 400 | 600 |
| Clamping force of blowing | KN | 43 | 150 | 150 |
| Opening stroke of mold platen | mm | 120 | 120 | 140 |
| Lifign height of rotary table | mm | 60 | 60 | 75 |
| Max. Platen size (lxw) | mm | 350x240 | 580x390 | 780x390 |
| min. Mould thickness | mm | 180 | 240 | 280 |
| Heating capacity of mould | Kw | 1.2-2.5 | 2.5 | 5 |
| Stripping system | ||||
| Stripping stroke | mm | 180 | 210 | 220 |
| Driving system | ||||
| Motor power | Kw | 15 | 22 | 30 |
| Hydraulic pressure | Mpa | 14 | 14 | 14 |
| Product range | ||||
| Suitable bottle range | L | 0.005-0.8 | 0.015-0.8 | 0.015-0.85 |
| Max. Bottle height | mm | ≤170 | ≤200 | ≤200 |
| Max. Dia. Of bottle | mm | ≤100 | ≤100 | ≤120 |
| Other | ||||
| Dry cycle | Seccon | 6 | 5 | 5 |
| Min. Air pressure | Mpa | 1.2 | 1.2 | 1.2 |
| Discharge rate of compressed air | m3/min | >0.8 | >0.8 | >0.8 |
| Water flowage | m3/h | 3 | 3.5 | 3.5 |
| Total rated power with mould heating | Kw | 22.56 | 32.1 | 47 |
| Dimension (lxwxh) | m | 3.1x1.3x2.3 | 3.85x1.7x2.3 | 4.2x1.9x2.4 |
| net weight | T | 3.7 | 7.7 | 10.2 |
Note:
Materials is suitable for majority kind of thermoplastic resin, such as HDPE, LDPE, PP, PS. EVA...
Cavity number of one mould corresponding to product volume. (for reference)
| Product volume | 8ml | 15ml | 20ml | 40ml | 60ml | 80ml | 100ml |
| LW30's cavity quantity | 7 | 6 | 5 | 4 | 4 | 3 | 3 |
| Product volume | 15ml | 20ml | 40ml | 60ml | 100ml | 120ml | 200ml |
| LW45's cavity quantity | 10 | 9 | 7 | 6 | 6 | 5 | 4 |
| LW60's cavity quantity | 16 | 14 | 14 | 12 | 10 | 9 | 6 |
Note: the technical data, components changed due to technology and we without pre-notice.
