Basic Equipment
Clamping system | Double station + high-precision guide + large arm cylinder axle |
Extrusion System | Hard gearbox +inverter |
Die System | Control-incoming die with special steel |
Hydraulic system | Hydraulic valves, seal parts and proportional control |
Control System | Import PLC + Human-machine + PLC automatic temperature control model |
Main specifications
Main parameters | unit | LWB65D | LWB75D | LWB80D |
Max. product volume | L | 5 | 8 | 12 |
Dry cycle | Pcs/h | 900x2 | 700x2 | 600x2 |
Screw diameter | mm | 60 | 70 | 80 |
Screw L/D ratio | L/D | 24 | 24 | 25 |
Screw drive power | Kw | 15 | 22 | 37 |
Screw heating power | 3ØKW | 6.5 | 7.2 | 8.8 |
Screw heating zone | Zone | 3 | 3 | 4 |
HDPE output | Kg/h | 70 | 90 | 130 |
Oil Pump power | Kw | 5.5 | 7.5 | 11 |
Clamping force | Kn | 40 | 65 | 120 |
Mold plate stroke | mm | 138-368 | 164-524 | 280-660 |
Mold platen size | WxH(mm) | 300x320 | 320x380 | 520x540 |
Max. mold size | WxH(mm) | 300x320 | 380x390 | 530x520 |
Blowing pressure | Mpa | 0.6 | 0.6 | 0.6 |
Air consumption | M3/Min | 0.5 | 0.6 | 0.8 |
Cooling water pressure | Mpa | 0.3 | 0.3 | 0.3 |
Water Consumption | L/Min | 50 | 60 | 60 |
Machine size | LxWxH(mm) | 2.8x2.2x2.4 | 3.2x2.2x2.5 | 4.6x3.1x2.8 |
Machine Weight | Ton | 4.3 | 7.8 | 11 |
Die-head
Number of heating zone | zone | 3 | 3 | 4 |
Power Of Die Heating | 4ØKW | 1.8 | 2.5 | 3 |
Max.die Pin Diameter | mm | 100 | 140 | 230 |
Center Distance Of Double Die | mm | 130 | 150/160 | 240 |
Center Distance Of Tri-die | mm | 110 | 110 | 160 |
Center Distance Of Tetra- Die | mm | 60/80 | 80 | 110 |
Note: the technical data, components changed due to technology and we without pre-notice.