Tel: +86-512-5637 9347
Mobile: +86-139 1569 7401
Fax: +86-512-5637 9347
QQ:565573958
Basic Equipment
| Clamping system | Single station + high-precision guide + large arm cylinder axle |
| Extrusion System |
Hard gearbox +inverter |
| Die System | control-incoming die with special steel |
| Hydraulic system | hydraulic valves, seal parts and proportional control |
| Control System | Import PLC + Human-machine + PLC automatic temperature control model |
Main specifications
| Main parameters | unit | LWB50 | LWB60 | LWB70 |
| Max. product volume | L | 2 | 5 | 12 |
| Dry cycle | Pcs/h | 1500 | 1100 | 900 |
| Screw diameter | mm | 50 | 60 | 70 |
| Screw L/D ratio | L/D | 24 | 24 | 24 |
| Screw drive power | Kw | 11 | 15 | 22 |
| Screw heating power | 3ØKW | 4.2 | 6.5 | 7.8 |
| Screw heating zone | Zone | 3 | 3 | 4 |
| HDPE output | Kg/h | 35 | 70 | 90 |
| Oil Pump power | Kw | 5.5 | 7.5 | 11 |
| Clamping force | Kn | 40 | 65 | 120 |
| Mold plate stroke | mm | 138-368 | 164-524 | 280-660 |
| Mold platen size | WxH(mm) | 300x320 | 320x380 | 520x540 |
| Max. mold size | WxH(mm) | 300x320 | 320x390 | 530x520 |
| Blowing pressure | Mpa | 0.6 | 0.6 | 0.6 |
| Air consumption | M3/Min | 0.4 | 0.5 | 0.8 |
| Cooling water pressure | Mpa | 0.3 | 0.3 | 0.3 |
| Water Consumption | L/Min | 35 | 50 | 60 |
| Machine size | LxWxH(mm) | 2.6x1.6x2.4 | 2.9x1.8x2.6 | 3.8x2.2x3.1 |
| Machine Weight | Ton | 3.2 | 5.8 | 6 |
Die-head
| Number of heating zone | zone | 3 | 3 | 3 |
| Power Of Die Heating | 4ØKW | 1.8 | 2.5 | 3 |
| Max.die Pin Diameter | mm | 100 | 140 | 230 |
| Center Distance Of Double Die | mm | 130 | 150/160 | 240/180 |
| Center Distance Of Tri-die | mm | 110 | 110 | 160/110 |
| Center Distance Of Tetra- Die | mm | 60/803 | 80 | 110/80 |
Note: the technical data, components changed due to technology and we without pre-notice.
